Home › Care Guide

User Care Guide

Thank you for choosing Forest3 Design. A few simple habits keep your new surface writing, wiping and looking good for years. Find your product below.

Wryte Whiteboard Film ZETA Whiteboard Paint ZETA Magnetic Plaster

Five rules for every writable surface

  • Dry-erase whiteboard markers only. We recommend Pilot V-Board Master or equivalent. Test a new marker brand at a corner first.
  • Never use permanent markers, paint or oil-based markers, dry-erase crayons, ballpoint pens, pencils or sharp objects.
  • Wipe with a clean foam duster or microfibre cloth. A dirty duster spreads ink, so wash or replace it regularly.
  • Erase writing regularly. Ink left on for weeks becomes harder to remove.
  • No abrasive pads, scrapers, solvents, thinner, acetone, bleach, ammonia or strong alcohol.

Wryte Whiteboard Film

For whiteboard film on walls, glass, doors and boards, in gloss, semi-matte and matte, magnetic and non-magnetic.

Daily use

  • Clean after use with a foam duster, whiteboard duster, microfibre or dry cloth.
  • For matte film, a duster with light friction works best. Avoid duster holders with hard or sharp edges.
  • Felt dusters trap ink dust over time; clean or replace them regularly.
  • Do not leave writing on the film for more than 30 days.

Regular cleaning (about every 2 weeks in busy rooms)

  • Wipe the whole surface with a damp cloth to stop residue building up.

Stubborn stains

  • 1. Wipe with a damp cloth.
  • 2. If needed, use warm, mild soapy water.
  • 3. For stronger stains, spray a little whiteboard cleaner, leave it briefly, then wipe with a clean cloth.
  • 4. Wipe again with a damp cloth to remove cleaner or soap residue before writing.

Good to know

  • Keep the film away from heat sources and high temperatures.
  • Do not stick tape, stickers or Blu Tack on the film, and do not try to lift, cut or reposition it yourself.
  • Permanent marker by accident? Contact us before trying any strong solvent or scrubbing.
  • Our magnetic whiteboard film has a soft metal inlay, not a magnet: the film is made to be receptive to magnets.
  • Film with a magnet inlay is also available; its product code includes "NM". For film with a magnet base, keep credit cards and other magnetic cards away from the surface.

ZETA Whiteboard Paint

For walls and panels coated with ZETA Whiteboard Paint, including magnetic whiteboard walls.

First 7 days

  • Do not write on the wall for 7 full days after the final coat. Writing before it has cured may permanently stain or damage it.
  • Let it cure naturally. Do not use heaters, heat guns or fans to speed it up.

Daily use

  • Use dry-erase whiteboard markers only. No liquid chalk markers on ZETA Whiteboard Paint.
  • Erase with a clean microfibre cloth or foam whiteboard duster.
  • If writing has been left on for a long time, wipe lightly with clean water or a damp cloth first to soften the ink, then erase.

Regular and deep cleaning

  • Clean the whole wall from time to time to stop ink residue building up.
  • For stubborn stains, use an alcohol-free whiteboard cleaner or eco cleaner, then wipe again with a damp cloth to remove any residue before writing. Many commercial whiteboard cleaners contain alcohol, which may damage a painted whiteboard surface over time.

Good to know

  • ZETA Whiteboard Paint is not scratch resistant. Keep sharp or hard objects, furniture edges and abrasive tools away from it.
  • Spot repairs can leave a visible difference in gloss. Please contact us before attempting any repair.
  • Permanent marker by accident? Clean it straight away and contact us. Do not scrub with an abrasive pad.

ZETA Magnetic Plaster (magnetic walls)

For walls with a hidden ZETA Magnetic Plaster layer under paint or ZETA Whiteboard Paint.

Care

  • The magnetic layer itself needs no maintenance and does not lose its magnet-receptive properties under normal indoor use.
  • Care for the top finish: if it is ZETA Whiteboard Paint, follow the ZETA Whiteboard Paint guide above; if it is ordinary wall paint, clean it as you would any painted wall.

Using magnets

  • Use strong magnets, such as neodymium magnets, for best hold. Flat fridge magnets hold much less.
  • For paper and light items only. Holding depends on the magnet type and size and the weight of the item.

Something not right?

Stop using strong cleaners and don't try to repair it yourself. Then send us:

  • clear photos or a short video of the affected area,
  • the date you first noticed it,
  • your quotation or invoice number and the site address,
  • the markers and cleaning method you have been using.

WhatsApp +65 8089 7248 or email sales@forest3.com. Please report any warranty matter within 7 days of noticing it. Warranty cover is set out in your warranty certificate and our Terms and Conditions F3DTC02.

Last updated: 17 November 2026. This guide is general care advice and does not replace your warranty certificate or quotation terms.

WhatsApp us