Home › Glass Display Concepts
Glass Display Concepts Singapore: Turn Glass into a Digital Display
Transparent LED Film and UTDAR projection film for storefronts, showrooms, lobbies and events. Your glass stays bright and open, and becomes a stage for your brand.
Every glass display starts with a feasibility check: glass, viewing distance, lighting, power and content.
★★★★★ 4.9 on Google
LED film in useYour Glass Could Be Working Harder
Storefronts, showroom glass and lobby partitions are often blank. Traditional screens block views, take up space and close off the interior. Display films let you show brand visuals, promotions and motion graphics on glass while it stays largely see-through.
LED Film or UTDAR Film?
LED film in useA Transparent Digital Screen on Your Glass
An ultra-thin, self-adhesive LED film that shows bright, vivid content by itself, while keeping natural light and views.
- Self-adhesive, for retrofit onto suitable existing glass
- About 50–90% physical transparency, depending on pixel pitch (supplier-reported)
- Brightness and pixel pitch chosen to suit site and content
- Can be cut and spliced to match project dimensions; flat and curved glass
Best for: storefront windows, glass facades, showrooms, malls, glass railings, lobbies, exhibition halls.
Make Visuals Float on Glass
An ultra-thin 0.2 mm projection film for glass or acrylic. With a projector, it creates the impression of visuals suspended on glass, while you can still see through.
- 70%+ transmittance, haze under 2% (supplier-reported)
- Up to 8K resolution support; 170° wide viewing angle
- Film width 1320 mm; custom sizing to suit the site and system
- Works with a projector and media source
Best for: exhibition halls, retail and showrooms, museums and galleries, science centres, stage and events, festive visuals on meeting room glass.
UTDAR film in useBest Applications
Keeps glass open
Content shows on the glass while light and views come through.
Ultra-thin profile
A clean architectural look, without bulky screens.
Retrofit friendly
Applied onto suitable existing glass or acrylic.
Bright and adjustable
Brightness and content planned for the site.
Custom sizes
Layouts planned to your glass dimensions.
Content your way
Brand visuals, promotions, video and festive graphics.
LED film in useEvery Glass Display Needs a Feasibility Check
- Forest3 Design does not supply structural glass systems; we install onto suitable glass supplied by others
- Glass suitability and condition are assessed before the final recommendation
- Final specification depends on pitch, brightness, viewing distance, content, power and site conditions
- UTDAR performance depends on projector brightness and ambient light; best indoors or in controlled light
- Mainly for interior or protected glazing, depending on project requirements
Specialists in Film on Glass and Walls Since 2013
Glass display films are new to our range, and we have no Singapore projects for them yet. What we bring is more than a decade of installing films on glass and walls, careful site assessment and our own installation team.
Site review and planning
Sizing, layout planning, power and integration advice before you commit.
Coordinated installation
We work with your glass supplier, facade contractor or main contractor.
After-sales support
Commissioning support, maintenance guidance and after-sales coordination.
Share your space
WhatsApp us a photo, dimensions or drawings. No photo yet? Just tell us what you need.
Get a recommendation
We suggest the surface that fits your use, site condition and budget.
Site assessment & quote
Where needed we visit the site, then send a clear quotation with scope and assumptions.
Installation & care guide
Our team installs, checks and hands over with practical care guidance.
What clients say about our work
Very smooth transaction, from contacting Sales to the final installation of our office wall paper. Workers for the job were experienced and efficient!Lynn L.Google review · ★★★★★
Joanne and Arafat were a real pleasure to work with… I highly recommend this company and would definitely engage them again.Gladia H.Google review · ★★★★★
Joanne and the team from Forest 3 Design installed our whiteboard wall professionally and efficiently. The workmanship is clean and the wall looks great.RajendranGoogle review · ★★★★★
LED Film & UTDAR Film Questions, Answered
What is the difference between LED Film and UTDAR Film?
LED Film is a transparent film with built-in LEDs that shows bright digital content on glass by itself. UTDAR Film is an ultra-thin projection film: it needs a projector and media source, and creates a floating visual effect on glass or acrylic. We recommend one or the other after looking at your site, viewing distance and display objective.
Can LED Film be installed on existing glass?
Often, yes. LED Film is self-adhesive and can be retrofitted onto suitable existing glass, including some curved glass. The glass type, size and condition must be assessed first.
How transparent is LED Film?
Transparency depends on the pixel pitch chosen. The supplier-reported physical transparency is about 50 to 90%, with higher visual transparency at a suitable viewing distance. We confirm the right pitch for your viewing distance and content.
Is LED Film visible in bright environments?
Brightness is adjustable and is selected to suit the site and content. Very bright, direct-sun locations need careful assessment, so we check lighting conditions during the site visit.
Does UTDAR Film need a projector?
Yes. UTDAR Film works with a projector and media source. Performance depends on projector brightness, distance, viewing angle and ambient light, so it is best for indoor or controlled-light spaces.
What content can be displayed?
Brand visuals, promotions, product videos, festive visuals and motion graphics. Content is supplied by you or your creative agency; we advise on formats and viewing conditions.
Do you supply the glass?
No. Forest3 Design supplies and installs the display film onto suitable glass supplied by others, and we coordinate with your glass supplier, facade contractor or main contractor.
Does it need power and control equipment?
LED Film needs power and a controller; UTDAR Film needs a projector and media player. Power points, cable routes and control equipment are planned during the site assessment and confirmed in the final specification.
Is it for permanent or event use?
Both can suit long-term installations such as storefronts and lobbies, as well as campaigns and events, depending on the site and project requirements.
How do I start?
Send us your glass size, a few site photos and what you want to display. We will advise whether LED Film or UTDAR Film suits your project, then arrange a site assessment.
Discuss Your Glass Display Concept With Us
Bring your glass sizes, drawings and display ideas to our Oxley Bizhub 2 showroom, and see our live smart film demo while you're there.
Showroom visits are by appointment only, as the showroom is not staffed at all times. WhatsApp 8089 7248 to book a time.
Send us these for a quick recommendation
- Glass size and type (photos help)
- Where it is: storefront, lobby, showroom, event
- What you want to show and the viewing distance
- Timeline and whether it is permanent or for an event
Have Glass You Want to Bring to Life?
Send us your glass size, site photos and display objective. We will advise whether LED Film or UTDAR Film suits your project.